Answers
Nov 18, 2021 - 11:48 AM
The rubber trim along the bottom edge of the bezel pulls off by hand; remove 3 Phillips #2 screws underneath. On the top side of the bezel, there should be notches on both sides to access the snap-in connections. The vinyl of the headliner may be blocking them from view - use a screwdriver to pry upwards on the headliner to find them. Insert a flat bladed screwdriver in one of the two notches on the bezel and pull down on the screwdriver slightly while pulling back on the bezel until you feel the ‘snap-in” connection release. Then do the other side the same way and carefully pull the bezel back, working it evenly side to side until it comes down.